SPECIFICATIONS:
| Stereo Power RMS @ 4 Ohm | 4 x 75W |
| Stereo Power RMS @ 2 Ohm | 4 x 110W |
| Bridge Power RMS @ 4 Ohm | 2 x 220W |
| Signal to Noise Ratio | > 90dB |
| Low Pass Crossover | 45Hz ~ 225Hz |
| High Pass Crossover | 45Hz ~ 225Hz |
| Frequency Response | 10Hz ~ 30KHz (+/- 1dB) |
| T.H.D. @ 4 Ohm | < 0.1% |
| Channel Separation | 65dB |
| Fuse Rating | 25A x 2 |
| Input Sensitivity | 200mV ~ 8V (+/- 5%) |
| Dimensions | 224 (W) x 50 (H) x 280 (L) mm |
FEATURES:
- 4/3/2 channel bridgeable class-AB amplifier
- MOSFET PWM power supply
- 4 ohm bridged or/and 2 ohm stereo
- 12dB octave crossover slope
- Variable crossover frequency with FULL/LPF/HPF selectable switch
- Input Sensitivity: variable 200 mV maximum to 8 V minimum
- Multi-Way Protection Circuitry: overhead, over current, short circuitry and speaker DC protection
- RCA line input and output
- Tested voltage & THD: 14.4V & less than 0.05% THD
- Operating voltage: DC10V~16V power input
- Wired Remote Controller RTC (optional)