-
ARCHIVED
6.5" 2-Way Component Kit
This car audio system is easy to install and brings high-performance sound to your vehicle. Focal’s famous inverted dome tweeter is an integral component of this coaxial kit to provide excellent linearity. The Mylar tweeter comes with two types of frame: one for surface mounting and one for ‘flush’ mounting. There’s also a third solution for optimal integration, which consists of removing the tweeters from their flush-mounting frames so that they can be installed in the vehicle’s factory locations. The high power handling of these kits, combined with their high sensitivity, will provide you with a high-performance system using the factory head unit or an amplifier. Rediscover the pleasure of driving while listening to your favourite music! -
ARCHIVED
1500W Monochannel Power Amplifier
Based on the FPS 1500 TechnologyAdvantages:
- Class D technology (improvement of efficiency, power/size ratio and thermal characteristics)
- Aluminum alloy dissipation basket with T fins to ensure optimized ventilation and reduce overheating risks (a common issue with monochannel amplifiers)
- High tech design (component structure and choice) to push back the limits of the cut-off and thus provide maximum power for the longest time possible.
- Progressive controlled cooling system: Regulates the amplifier temperature
- Mosfets (IRFP250N): Audiophile and powerful
- Direct mode: The audio signal is directly amplified
- Low-pass crossovers: Adjustable from 50Hz to 500Hz
- Pseudo-balanced input: No parasite
- Controlled cooling system: Air flow control
- Safety terminal: Cable and sheath complete integration
- Rubber pads in the corners: Damping of vibrations
- High bass quality, Full Mosfet, Very high power, Stable into 1 Ohm, Remote Control
-
ARCHIVED
750W Mono Channel Power Amplifier
Direct mode available for quality active amplification. Thermo-controlled ventilation. Compatible with High-Cap.Advantages:
- Class D technology (improvement of efficiency, power/size ratio and thermal characteristics)
- Progressive controlled cooling system: Regulates the amplifier temperature
- Mosfets (IRFP250N): Audiophile and powerful
- Direct mode: The audio signal is directly amplified
- Low-pass crossovers: Adjustable from 50Hz to 500Hz
- Pseudo-balanced input: No parasite
- Controlled cooling system: Air flow control
- Safety terminal: Cable and sheath complete integration
- Remote control, Stable into 1 Ohm, High-Cap compatible, Full Mosfet
-
ARCHIVED
High-end Class AB amplifier.
Direct mode available for quality active amplification. Thermo-controlled ventilation. Compatible with High-Cap.Advantages:
- Symmetrical design: Audiophile Quality
- Progressive controlled cooling system: Regulates the amplifier temperature
- Insulated Gate Bipolar Transistor (IGBT): Audiophile and powerful
- Direct mode: The audio signal is directly amplified
- High-pass, low-pass and band-pass crossovers: Adjustable from 50Hz to 5kHz
- Pseudo-balanced input: No parasite
- Controlled cooling system: Air flow control
- Safety terminal: Cable and sheath complete integration
- Stable into 2 Ohms stereo, High-Cap compatible
-
ARCHIVED
High-end Class AB amplifier.
Direct mode available for quality active amplification. Thermo-controlled ventilation. Compatible with High-Cap.Advantages:
- Symmetrical design: Audiophile Quality
- Progressive controlled cooling system: Regulates the amplifier temperature
- Insulated Gate Bipolar Transistor (IGBT): Audiophile and powerful
- Direct mode: The audio signal is directly amplified
- High-pass, low-pass and band-pass crossovers: Adjustable from 50Hz to 5kHz
- Pseudo-balanced input: No parasite
- Controlled cooling system: Air flow control
- Safety terminal: Cable and sheath complete integration
- Remote control, Stable into 1 Ohm, High-Cap compatible, Full Mosfet
-
ARCHIVED
High-end Class AB amplifier.
Direct mode available for quality active amplification. Thermo-controlled ventilation. Compatible with High-Cap.Advantages:
- Symmetrical design: Audiophile Quality
- Progressive controlled cooling system: Regulates the amplifier temperature
- Insulated Gate Bipolar Transistor (IGBT): Audiophile and powerful
- Direct mode: The audio signal is directly amplified
- High-pass, low-pass and band-pass crossovers: Adjustable from 50Hz to 5kHz
- Pseudo-balanced input: No parasite
- Controlled cooling system: Air flow control
- Safety terminal: Cable and sheath complete integration
-
ARCHIVED
FPS High-Cap.
Power Supply OverboostAdvantages:
- Aluminum frame: Same finish as FPS
- High temperature class capacitor: 105°C / 80V – 4x3300uF
- Pre-wired box: Plug & Play connection
- Woven protection sheath: Installation safety
- Enhanced dynamic behavior
- Improved speaker control
- Punchier sound
- Serial low resistance capacitors
-
ARCHIVED
2-Way Slim Component Kit
3 15/16 " (100mm) 2 way speakers kit with shallow mounting depth, high precision separate crossover with tweeter and midrange adjustment. Woven aramid fiber tweeter for optimum coherence. This Car Audio kit permits an installation on top of the door or on the dashboard. -
ARCHIVED
5.25" 2-way Component Kit
5 1/8" (130mm) 2 way kit, with high precision separate crossover with tweeter and midrange adjustment. Woven aramid fiber tweeter for optimum coherence. Chassis with normalized dimensions for easy installation, perfect compromise between easy installation and performance. -
ARCHIVED
6.5" 2-way Component Kit
6 1/2 (165mm) 2 way separate kit that works into 2 Ohms, high precision separate crossover with tweeter and midrange adjustment. Woven aramid fiber tweeter for optimum coherence. The optimum sandard that combines easy installation and high dynamics. -
ARCHIVED
6.5" 2-way Component Kit
6-1/2" (165mm) 2-way kit, high precision separate crossover integrating tweeter level adjustment, adjustable midrange as well as treble booster. Grilles supplied. The aluminum basket permits high power handling, solid and punchy bass, midrange purity as well as treble smoothness and accuracy.
