2-Way Component Kit
Woofer: 6x9" (150x230mm)Advantages:
- High sensitivity
- Shallow mounting depth (82.5 mm)
- Partial horn loading tweeter
- Dynamics and neutrality
- 2 tweeter support types
- Tweeter compact size
- Toyota® car compatibility
-
ARCHIVED
Ultra Compact Mono Amplifier
The FD 1.350 is a mono block amplifier specifically designed for handling a subwoofer channel. It has a power of 210 and 350 Watts RMS under 4 and 2 Ohms respectively. In order to configure the system’s bass according to the car’s installation; it is equipped with an active crossover, bass correction and phase adjustment.Advantages
- D Class – Direct Fet ® Technology - Efficient heat dissipation and precision
- Stable under 2 Ohms
- Stackable aluminium chassis with high heat dissipation
- Low noise operational amplifiers New Japan Radio® NJM4580
- Low ESR capacitors - 105°C (220°F)
- Pseudo-balanced inputs
- Cable accessories included - easy to install
-
ARCHIVED
Ultra Compact 2-Channel Amplifier
The FD 2.350 is a 2-channel model delivering a power of 2 x 105 Watts RMS under 4 Ohms. For a perfect matching, it’s featuring an active high-pass and lowpass crossover. The FD 2.350 can consequently drive a pair of speaker drivers or a subwoofer.Advantages
- D Class – Direct Fet ® Technology - Efficient heat dissipation and precision
- Stable under 2 Ohms
- Stackable aluminium chassis with high heat dissipation
- Low noise operational amplifiers New Japan Radio® NJM4580
- Low ESR capacitors - 105°C (220°F)
- Pseudo-balanced inputs
- Cable accessories included - easy to install
-
ARCHIVED
Ultra Compact 4-Channel Amplifier
The FD 4.350 is the 4-channel model (4 x 58 Watts RMS) and the most versatile of the range. It can operate in 4-, 3- or 2-channel mode. In most cases, it will be used to amplify a car’s front and rear speaker drivers. It can also be used to drive front speaker drivers and a small subwoofer, for a small installation which stays simple and integrated.Advantages
- D Class – Direct Fet ® Technology - Efficient heat dissipation and precision
- Stable under 2 Ohms
- Stackable aluminium chassis with high heat dissipation
- Low noise operational amplifiers New Japan Radio® NJM4580
- Low ESR capacitors - 105°C (220°F)
- Pseudo-balanced inputs
- Cable accessories included - easy to install
-
ARCHIVED
4" 2-Way Coaxial Kit
Upgrade your car’s factory system with a kit that is easy to install and capable of even higher performance than the previous generation of Auditor kits. Rediscover the pleasure of driving to your favourite music with speaker drivers wired to your current head unit. This coaxial kit is now equipped with Focal’s famous inverted dome tweeters to provide excellent linearity. The high sensitivity of this kit will set it apart from your vehicle’s factory system. Auditor makes Focal technology and performance available to all drivers. Grilles supplied. -
ARCHIVED
5" 2-Way Coaxial Kit
Upgrade your car’s factory system with a kit that is easy to install and capable of even higher performance than the previous generation of Auditor kits. Rediscover the pleasure of driving to your favourite music with speaker drivers wired to your current head unit. This kit is an easy-to-install solution for your first aftermarket system.
This coaxial kit is now equipped with Focal’s famous inverted dome tweeters to provide excellent linearity. The high sensitivity of this kit sets it apart from your vehicle’s factory system, while keeping your current head unit. Auditor makes Focal technologies available to all!
Grilles supplied.
-
ARCHIVED
6.5" 2-Way Coaxial Kit
Upgrade your car’s factory system with a kit that is easy to install and capable of great performance. Rediscover the pleasure of driving to your favourite music with speaker drivers wired to your current head unit.
Focal’s famous inverted dome tweeter is an integral component of this coaxial kit to provide excellent linearity. With the compact design of the tweeter and its frame, it can be easily mounted for perfect integration into your vehicle’s doors.
The high sensitivity of this kit sets it apart from your vehicle’s factory system, while keeping your current head unit. Auditor makes technology Focal sound accessible to all!
Grilles supplied.
-
ARCHIVED
5" x 7" 2-Way Coaxial Kit
Upgrade your car’s factory system with a kit that is easy to install.
This car audio kit is perfect for installing in specific factory locations (ex. Ford®) while providing a high-performance system. Upgrade your car’s factory system with a kit that is easy to install and capable of great performance. Rediscover the pleasure of driving while listening to your favourite music with a speaker driver kit wired directly to your current head unit.
-
ARCHIVED
6" x 9" 3-Way Coaxial Kit
Rediscover the pleasure of driving to your favourite music with speaker drivers wired to your current head unit.
This car audio kit is perfect for installing in specific factory locations, providing a high-performance system with speaker drivers integrated into the parcel shelf. Upgrade your car’s factory system with a kit which is easy to install. Rediscover the pleasure of driving listening to your favourite music with a speaker driver kit wired directly to your current head unit.
This coaxial kit is now equipped with Focal’s famous inverted dome tweeters to provide excellent linearity. The high sensitivity of this kit sets it apart from your vehicle’s factory system, while keeping your current head unit. Auditor makes Focal technology accessible to all!
Grilles supplied.
-
ARCHIVED
5" 2-Way Component Kit
This car audio kit combines high-performance and easy integration. Focal’s famous inverted dome tweeter is now an integral component of this coaxial kit to provide excellent linearity. The Mylar inverted dome tweeter comes with two types of frame: one for surface mounting and one for ‘flush’ mounting. There’s also a third solution for optimal integration, which consists of removing the tweeters from their flush-mounting frames so they can be installed in the vehicle’s factory locations. The high power handling of these kits, combined with their high sensitivity, will provide you with a high-performance system using the factory head unit or an amplifier. Upgrade your car’s factory system with a kit that is easy to install. Rediscover the pleasure of driving while listening to your favourite music! Grilles supplied. -
ARCHIVED
6.5" 2-Way Component Kit
This car audio system is easy to install and brings high-performance sound to your vehicle. Focal’s famous inverted dome tweeter is an integral component of this coaxial kit to provide excellent linearity. The Mylar tweeter comes with two types of frame: one for surface mounting and one for ‘flush’ mounting. There’s also a third solution for optimal integration, which consists of removing the tweeters from their flush-mounting frames so that they can be installed in the vehicle’s factory locations. The high power handling of these kits, combined with their high sensitivity, will provide you with a high-performance system using the factory head unit or an amplifier. Rediscover the pleasure of driving while listening to your favourite music! -
10" Subwoofer for Sealed Enclosures
This double voice coil subwoofer benefits from a polypropylene cone with high rigidity, a crucial requirement in the low end for preventing distortion at very high volume. Equipped with double ferrite magnets and 2” (50mm) voice coils, these subwoofers combine high sensitivity and high power handling. The 2 x 4 ohms double voice coil is the perfect finishing touch to the mechanical design. This allows the subwoofer to be wired in parallel under 2 ohms in order to get the most from your amplifier. -
12" Subwoofer for Sealed Enclosures
This double voice coil subwoofer benefits from a polypropylene cone with high rigidity, a crucial requirement in the low end for preventing distortion at very high volume. Equipped with double ferrite magnets and 2” (50mm) voice coils, these subwoofers combine high sensitivity and high power handling. The 2 x 4 Ohms double voice coil is the perfect finishing touch to the mechanical design. This allows the subwoofer to be wired in parallel under 2 Ohms in order to get the most from your amplifier. -
4/3/2-Channel A/B Class Amplifier
The AP-4340 4-channel class AB amplifier can be used in three modes: 4, 3 or 2-channel.
In 4-channel mode, its CEA power of 4 x 70W RMS will allow you to get the most from your Auditor kits installed up front and in the rear. The 3-channel mode enables you connect a kit to channels one and two, as well as an Auditor subwoofer to channels three and four in bridged mode for a CEA power of 190W RMS under 2 Ohms. The 2-channel mode, which consists of bridging channels 1-2 and 3-4, provides a CEA power of 2 x 190W RMS under 2 Ohms.
Equipped with high-pass and low-pass crossovers, as well as a subsonic crossover, the AP-4340 amplifier guarantees the optimal performance of the kits and subwoofers in this line.
- Aluminum chassis- High heat dissipation
- RCA inputs- After-Market headunit
- Crossover settings- Low-pass/High-pass, Bass boost adjustment
- Bridgeable
- Stable under 2Ω
-
ARCHIVED
1500W Monochannel Power Amplifier
Based on the FPS 1500 TechnologyAdvantages:
- Class D technology (improvement of efficiency, power/size ratio and thermal characteristics)
- Aluminum alloy dissipation basket with T fins to ensure optimized ventilation and reduce overheating risks (a common issue with monochannel amplifiers)
- High tech design (component structure and choice) to push back the limits of the cut-off and thus provide maximum power for the longest time possible.
- Progressive controlled cooling system: Regulates the amplifier temperature
- Mosfets (IRFP250N): Audiophile and powerful
- Direct mode: The audio signal is directly amplified
- Low-pass crossovers: Adjustable from 50Hz to 500Hz
- Pseudo-balanced input: No parasite
- Controlled cooling system: Air flow control
- Safety terminal: Cable and sheath complete integration
- Rubber pads in the corners: Damping of vibrations
- High bass quality, Full Mosfet, Very high power, Stable into 1 Ohm, Remote Control
-
ARCHIVED
750W Mono Channel Power Amplifier
Direct mode available for quality active amplification. Thermo-controlled ventilation. Compatible with High-Cap.Advantages:
- Class D technology (improvement of efficiency, power/size ratio and thermal characteristics)
- Progressive controlled cooling system: Regulates the amplifier temperature
- Mosfets (IRFP250N): Audiophile and powerful
- Direct mode: The audio signal is directly amplified
- Low-pass crossovers: Adjustable from 50Hz to 500Hz
- Pseudo-balanced input: No parasite
- Controlled cooling system: Air flow control
- Safety terminal: Cable and sheath complete integration
- Remote control, Stable into 1 Ohm, High-Cap compatible, Full Mosfet
-
ARCHIVED
High-end Class AB amplifier.
Direct mode available for quality active amplification. Thermo-controlled ventilation. Compatible with High-Cap.Advantages:
- Symmetrical design: Audiophile Quality
- Progressive controlled cooling system: Regulates the amplifier temperature
- Insulated Gate Bipolar Transistor (IGBT): Audiophile and powerful
- Direct mode: The audio signal is directly amplified
- High-pass, low-pass and band-pass crossovers: Adjustable from 50Hz to 5kHz
- Pseudo-balanced input: No parasite
- Controlled cooling system: Air flow control
- Safety terminal: Cable and sheath complete integration
- Stable into 2 Ohms stereo, High-Cap compatible
-
ARCHIVED
High-end Class AB amplifier.
Direct mode available for quality active amplification. Thermo-controlled ventilation. Compatible with High-Cap.Advantages:
- Symmetrical design: Audiophile Quality
- Progressive controlled cooling system: Regulates the amplifier temperature
- Insulated Gate Bipolar Transistor (IGBT): Audiophile and powerful
- Direct mode: The audio signal is directly amplified
- High-pass, low-pass and band-pass crossovers: Adjustable from 50Hz to 5kHz
- Pseudo-balanced input: No parasite
- Controlled cooling system: Air flow control
- Safety terminal: Cable and sheath complete integration
- Remote control, Stable into 1 Ohm, High-Cap compatible, Full Mosfet
