Single 10” Ford F Series Super Crew Enclosure
27 ½” W x 14” D x 9¾” (Front H) / 6⅜" (Back H)Includes:
Fits:
- Ford F-150 Crew Cab 2011-2018
- Ford Super Duty Crew Cab 2017-2018
-
Dual 10” GM Trucks crew cab Enclosure
52⅛ W x13¾” D x 8” (Front H) / 6" (Back H)Includes:
Fits:
- Chevrolet Silverado Crew Cab 2007-2018
- GMC Sierra Crew Cab 2007-2018
-
Dual 10” Ford F Series Super Crew Enclosure
55⅛ W x 14” D x 9¾“ (Front H) x 6⅜” (Back H)Includes:
Fits:
- Ford F-150 Crew Cab 2011-2018
- Ford Super Duty Crew Cab 2017-2018
-
ARCHIVED
Single 12” Universal Subwoofer Enclosure
19" x 14-1/4" x 15"Includes:
- (1) Access SubP30F Subwoofer
- Blackhole Stuff
Fits:
- Universal Vehicle Fit
-
ARCHIVED
High/Low-level converter
2 ChannelsAdvantages
- Convert two high-level outputs (speaker) of a car radio in two low-level line outputs for an amplifier and also eliminates parasitic interference.
- Automatically generates a remote control of the amplifier power-on from the signal detection.
- Can be used in passive mode without 12V supply (In which case the remote output doesn’t work).
- Separated grounds, less parasitic interference.
- The Focal HILO can be wired in parallel to the speakers to add a subwoofer, or in place of the speakers to enable a fully-amplified system.
- Automatic remote output.
-
1-CHANNEL AMPLIFIER
1 X 700W @ 2Ohms, 1 x 1000W @ 1Ohm, 1 x 420W @ 4Ohms
The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. Stable at 2 Ohms and 1 Ohm, equipped with a complete range of settings for adjusting low-frequency sensitivity, a remote control and output lines, this amplifier is capable of bluffing performances. Whether it’s for powering an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs for your bass channel.- Mono Class D amplifier
- Complete range of settings (active crossover, subsonic filter, bass boost, phase control)
- Stable under 2 Ohms and 1 Ohm
- Output lines
- The FPX 1.1000 only measures 1111⁄16 x 513⁄64 x 23⁄32″ (29.7 x 13.2 x 5.3 cm).
-
ARCHIVED
2-CHANNEL AMPLIFIER - 2 X 220 WATTS
The FPX 2.750 is a very compact 2-channel amplifier with a power of 2x220 Watts RMS at 4 Ohms. Thanks to its 2-/1-channel mode, its stability at 2 Ohms, the numerous settings and the output lines, the FPX 2.750 is an extremely versatile solution. Its very high power makes it just as ideal for multi-channel systems as it is for powering a subwoofer. Offering high power and musicality, this amplifier is ideal for getting the best out of the high-end speaker drivers in our Performance line.- 2-/1-channel Class D amplifier
- Active crossover and subsonic filter
- Stable at 2 Ohms
- Output lines
- The FPX 2.750 only measures 9 x 513⁄64 x 23⁄32″ (23.7 x 13.2 x 5.3 cm).
-
4-CHANNEL AMPLIFIER - 4 X 70 WATTS
The FPX 4.400 is a very compact 4-channel amplifier with a power of 4x70 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.400 is the most “sound quality” model in this range. Thanks to its very comfortable power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.- 4-/3-/2-channel Class ABD amplifier
- 2-/4-channel input modes
- Stable at 2 Ohms
- Active crossover for each pair of channels
- The FPX 4.400 measures 12 23⁄64 x 6 57⁄64 x 2 1⁄4 " (314x175x57mm)
-
4-CHANNEL AMPLIFIER - 4 X 120 WATTS
The FPX 4.800 is a very compact 4-channel amplifier with a power of 4x120 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.800 is the most versatile model in this range. Thanks to its very high power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The high power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.- 4-/3-/2-channel Class D amplifier
- 2-/4-channel input modes
- Stable at 2 Ohms
- Active crossover for each pair of channels
- The FPX 4.800 measures 921⁄64 x 513⁄64 x 23⁄32″ (23.7 x 13.2 x 5.3 cm).
-
5-CHANNEL AMPLIFIER - 4 X 120 WATTS
5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt + 1 x 720 Watt at 2 Ohms! The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs. To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to. Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.- Class D amplifier
- Input selector (2/4/6 channels)
- Stable under 4 and 2 Ohms
- Adjustable active crossover for each pair of channels
- Dimensions: 13.25″ x 6.8″ x 2.25″ (337 x 175 x 57mm)
-
ARCHIVED
HIGH LEVEL TO RCA LINE STEREO CONVERTER
In order to feed your amplifiers with an appropriate and qualitative audio signal, keeping your original head-units and the associated OEM controls, you can choose the converter HILO.V2. HILO.V2 converts a stereo amplified signal in two low-level line outputs, eliminates parasitic interferences and generates separated grounds. You can now use an amplifier very simply, without any interference. It is now very easy to create a quality hi-fi install in your car. Entirely developed by Focal, HILO is now available under generation 2. It is 100% rethought to match any OEM head-unit thanks to its DC and AC voltage detection, and providing a full compatibility with FPX range. -
8-CHANNEL DIGITAL SIGNAL PROCESSOR
FSP-8 is the ultimate digital tool to optimize and shape the audio signal... High-resolution sound quality, compatible inputs/outputs, a user interface designed for and by acoustic experts, FSP-8 is the ultimate tool for the most demanding installations. How could we create the best product on the market for connecting your head unit to your amplifier system? How could we make it possible for you to shape and fine-tune the audio spectrum to create your very own musical experience? Even if most vehicles today are equipped with a standard audio system, the most demanding sound enthusiasts want unique, high-quality audio for their car. They want to build their system, step by step and have full control over each element of the audio story. The DSP (Digital Signal Processor) is an essential tool in achieving this.- Unique and intuitive user interface Focal DSP Manager
- Remote control included
-
2-WAY COMPONENT KIT
Equipped with the Access cone, the Harley-Davidson dedicated speaker drivers of the HDA 165 - 2014 UP deliver a quality sound. This Focal Inside solution has been designed and developed for motorcycles operating in a noisy environment. It integrates an Aluminium inverted dome compression tweeter for high power and sound definition without directivity. Custom Harley-Davidson special grilles are also added for perfect integration in the original location.
KEY POINTS
- Simplified installation
- 100% compatible with your motorcycle
- Sound quality superior compared to the original one
- Mounting accessories included
